Front Panel View Of Psu 5200 - Bosch PSU 5000 Series Instructions For Assembly And Operation Manual

PSU front
panel views

4.2 Front panel view of PSU 5200

X11 Plug- -in terminal:
Connection of PSG sensors
for temperature, measuring
coil signal, electrode voltage
X21 Plug- -in terminal:
Ext. reset, ext. enable, fault
codes (to PLC), internal volt-
age supply output (24 VDC,
max. 2A)
Water connection
inlet and outlet
4--2
PSU 5000 / PSG 3000
Instructions for Assembly and Operation
PSU 5200.XXX
Mounting eyes
Mains connection
U1, V1, W1, PE
PSU 5XXX.1XX: 400- -480 VAC; 50 / 60 Hz
PSU 5XXX.2XX: 480- -690 VAC; 50 / 60 Hz
Ready message, green LED
Weld time, green LED
Diagnostics display
Max. pulse width
(message per decimal point)
Reset button
Cover for measuring points, internal DIP
switches S1, S2, S3 and slot for future
options
Shield connection for X11 and X12
X5 Plug- -in terminal:
System connection to timer unit
X12 Plug- -in terminal:
Current feedback to timer unit with SSU
operation, input for analog command value
X22 Plug- -in terminal:
Input for weld time, 24 V I/O supply
Output terminals to PSG (U, V)
Mounting eyes
1070 078 224--- 108