Safety instructions
Compatibility with residual- -current devices to EN 50178
Normal use
I --- 4
PSU 5000 / PSG 3000
Instructions for Assembly and Operation
ATTENTION!
Compatibility with residual--current devices to EN 50178:
!
If a residual--current device is used at the mains side of the inverter to protect per-
sons in the event of direct or indirect contact, a type B device must be used. The
residual--current device must additionally be capable of safely detecting a possible
residual current with a frequency of 1 kHz / 1.2 kHz.
The PSU medium--frequency welding inverter in connection with the PSG trans-
former--rectifier unit serves for
` resistance welding of metals
using rectified secondary current at the welding current transformer.
The medium--frequency welding equipment is only suitable for
` industrial applications.
Definition in accordance with: DIN EN 50082--2 of Electromagnetic Compatibility
(EMC).
It is not intended for any other use!
ATTENTION!
The use for purposes other than the intended use may result in personal damage to
!
the user or third persons or damage to the equipment, the workpiece to be welded
or environmental hazards.
Therefore, our products should only be used for their intended purpose!
1070 078 224--- 109