Siemens SINUMERIK 840D sl Function Manual page 479

Example 1
N1 M3 S1000
N2 RELEASE (SPI(1))
N3 S3000
Example 2
N1 RELEASE (AX1)
N2 G04 F2
N3 G0 X100 Y100:
Example 3
N1 RELEASE (AX1)
N2 G04 F2
N3 POS (X) = 100:
*) If the axis is still synchronized, no dedicated block will be generated.
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
K5: Mode groups, channels, axis interchange
6.4 Axis/spindle replacement
; => Transition to neutral condition
; New speed for released spindle
; MD AUTO_GET_TYPE =
; 0 =>Alarm "Wrong axis type" is
generated
; 1 => GET (SPI(1)) is generated.
; 2 => GETD (SPI(1)) is generated.
; (axis 1 = X)
; => Transition to neutral condition
; Motion of the released axis
; MD AUTO_GET_TYPE =
; 0 =>Alarm "Wrong axis type" is
generated
; 1 => GET (AX1) is generated.
; 2 => GETD (AX1) is generated.
; (axis 1 = X)
; => Transition to neutral condition
; Positioning of the released axis:
; MD AUTO_GET_TYPE =
; 0 =>Alarm "Wrong axis type" is
generated
; 1 => GET (AX1) is generated. *)
; 2 => GET (AX1) is generated. *)
479