Siemens SINUMERIK 840D sl Function Manual page 931

5. Set the sizes of partitions U and M in machine data:
6. Activate the number of required channels and axes.
7. You can adjust the default memory division by increasing/decreasing individual memory
8. Reset the NCK.
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
MD18352 $MN_MM_U_FILE_MEM_SIZE
(end-user memory for part programs/cycles/files)
MD18353 $MN_MM_M_FILE_MEM_SIZE
(memory size for cycles/files of the machine manufacturer)
References:
SINUMERIK 840D Commissioning Manual
SINUMERIK 840Di Manual
areas of the active file system (tool management, global user data, etc.) for each user.
– The static user memory still available is displayed in machine data:
MD18060 $MN_INFO_FREE_MEM_STATIC
(free-static-memory display data)
– Setting machine data (→ Data lists).
References:
Detailed machine-data description
The memory is set up again.
S7: Memory configuration
15.3 Configuration of the static user memory
931