GE USM 36 Series Technical Reference And Operating Manual page 93

Setting the pulser (function group PULSER)
The following settings are possible:
● AUTO LOW 400 Hz
● AUTO MED 1000 Hz
● AUTO HIGH 1500 Hz
● MANUAL
– Select the function PRF MODE.
– Choose the required value.
– If you have selected MANUAL, set the required val-
ue.
USM 36
N o t e
You can detect and avoid phantom echoes
by means of the optional function phantom
PRF (see Section Phantom echo detector,
page 5-57).
Issue 2 (12/2013)
5 Operation
5-17