GE USM 36 Series Technical Reference And Operating Manual page 43

Power supply
Connecting the instrument
Connect the USM 36 to the mains socket-outlet by
means of the corresponding charger/power adaptor.
The socket-contact for connecting the charger/power
adaptor is located on the top of the USM 36.
– Loosen the knurled screw (1) and remove the cover.
– Align the Lemo plug of the charger/power adaptor
with the socket (2).
– Push the plug into the socket until it locks into place
with a clearly audible click.
– When removing the Lemo plug, pull the metal sleeve
on the plug back first in order to open the lock.
A T T E N T I O N
In order to power the instrument off correctly,
press the power On/Off key (3) for 3 sec-
onds. If the power supply is interrupted (re-
moving the battery, disconnecting the power
plug), the operation does not end correctly.
USM 36 Issue 2 (12/2013)
3 Initial start-up
1
3
2
3-3