Yamaha 006IPTO-F0 Owner's Manual page 292

292
Chapter 20—Other Functions
11 If there is any problem with the calibration result, the DM1000 displays the
following window.
Also, the channel [SEL] button indicator of a problematic fader flashes.
Use the cursor buttons to select one of the following three options, then press[ENTER].
• CONTINUE..........................................While the [SEL] button indicator of a problem-
• START FROM THE BEGINNING ....The calibration process returns to Step 2.
• QUIT ANYWAY ...................................The DM1000 cancels the calibration operation
If this window appears after you try the calibration process several times, consult your near-
est Yamaha dealer.
If the calibration data has some problems, the DM1000 displays the following window
when it starts up. In this case, calibrate the position of the faders specified in the window.
DM1000 Version 2—Owner's Manual
atic fader is flashing, the calibration process
returns to Step 5.
and starts in normal mode. The standard setting
will be applied to problematic faders.