Yamaha 006IPTO-F0 Owner's Manual page 222

222
Chapter 17—Remote Control
■ Meter Display mode ( [F4] button)
Press the [F4] button to select this display mode, in which the level meters for tracks 1–16
are displayed.
• Channels 1–16.............. The channel 1–16 levels or Send levels are displayed.
Control Surface Operation
When the Pro Tools Remote Layer is selected, the DM1000 controls on the top panel engage
the following functions:
■ Channel Strip section
• Encoders
Encoders adjust the panpots or Aux Send levels. Use the ENCODER MODE [PAN] or
[AUX] button to select a parameter to edit.
• [SEL] buttons
These buttons select Pro Tools channels, inserts, and Automation mode. By default, these
buttons select channels.
• [SOLO] buttons
These buttons solo Pro Tools channels. The button indicators for the soloed channels light
up.
• [ON] buttons
These buttons mute Pro Tools channels.
• Faders
The faders set Pro Tools channel levels, including the audio tracks, MIDI tracks, master
fader, Aux Ins, etc. If 16 or fewer channels are displayed in Pro Tools, faders are assigned
starting from the left-most channel.
■ STEREO section
• [AUTO] button
This button switches Pro Tools Automation mode.
DM1000 Version 2—Owner's Manual