Other Internet Operations
Checking the version number of the instrument
You can check the version number of this instrument.
Engage the function mode, then select the function number and enter the desired Sub-
modes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).
Procedure
1. Select Function [F9.4] (on the CLP-370/340) or F8.4 (on the CLP-
S308/S306).
[TEMPO/FUNCTION ▼, ▲]
Use the
370/340) or F8.4 (CLP-S308/S306).
2. Call up the version number.
Press the
[+/YES]
A "PrG" message and version number "x.xx" will appear alternately on the
display.
3. Return to the Sub-modes Selection mode
Press the
[+/YES]
4. Exit from the Function mode
Press the
[TEMPO/FUNCTION]
Checking the version number of the LAN Port driver
You can check the version number of the LAN Port driver.
Engage the function mode, then select the function number and enter the desired Sub-
modes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).
Procedure
1. Select Function F9.5 (on the CLP-370/340) or F8.5 (on the CLP-
S308/S306).
[TEMPO/FUNCTION ▼, ▲]
Use the
370/340) or F8.5 (CLP-S308/S306).
2. Call up the version number.
Press the
[+/YES]
A "L-P" message and version number "x.x.x" will appear alternately on the
display.
3. Return to the Sub-modes Selection mode
Press the
[+/YES]
4. Exit from function mode
Press the
[TEMPO/FUNCTION]
buttons to select Function F9.4 (CLP-
button so that the version number appears on the display.
button to exit from the sub-modes.
button to exit from function modes.
buttons to select Function F9.5 (CLP-
button so that the version number appears on the display.
button to exit from the Sub-modes.
button to exit from the Function modes.
Internet Direct Connection (CLP-370/340, CLP-S308/S306)
CLP-370/340/330, CLP-S308/S306 Owner's Manual
53