Yamaha Clavinova CLP-100 Owner's Manual page 23

Procedure
To select an reverb type, press the
responding to the desired type lights (the indicators light in sequence each time you
press the button). No effect is produced when all indicators are off.
[REVERB]
Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by using the
while holding the [REVERB] button. The depth range is from 0 through 20. The cur-
rent depth setting appears on the LED display while the
[EFFECT]
The [EFFECT] button allows you to select an effect to give your sound greater depth
and animation.
When no effect is selected, no EFFECT indicator is lit.
OFF:
CHORUS: A shimmering, broadening effect
Adds a sweeping effect to the sound.
PHASER:
Tremolo effect
TREMOLO:
Adds the vibrato effect of a rotary speaker.
ROTARY SP:
Procedure
To select an effect type, press the
sponding to the desired type lights (the indicators light in sequence each time you press
the button). No effect is produced when all indicators are off.
[EFFECT]
Adjusting Effect Depth
You can adjust the effect depth for the selected voice by using the
buttons while holding the [EFFECT]
The depth range is from 0 through 20. The current depth setting appears on the LED
display while the button is held.
[EFFECT]
[DAMPER RES.]
The Damper Resonance lets you hear a simulation of the sustain sound of the damper
pedal on a grand piano, as you press the damper pedal and play the keyboard.
This effect is applied to the entire sound of the instrument.
Procedure
Pressing the [DAMPER RES.]
off.
Adjusting DAMPER RES. Depth
You can adjust the Damper Resonance depth by using the
while holding the
[DAMPER RES.]
The depth range is from 0 through 20. The current depth setting appears on the LED
display while the
[DAMPER RES.]
button a few times until the indicator cor-
[REVERB]
[REVERB]
button a few times until the indicator corre-
[EFFECT]
button.
button repeatedly toggles the Damper Resonance on and
button.
button is held.
buttons
[–/NO] [+/YES]
button is held.
and
[–/NO] [+/YES]
and buttons
[–/NO] [+/YES]
CLP-370/340/330, CLP-S308/S306 Owner's Manual
Selecting & Playing Voices
NOTE
Depth 0: no effect
Depth 20: maximum reverb depth
NOTE
The default effect type (including
OFF) and depth settings are dif-
ferent for each voice.
NOTE
Releasing the [EFFECT] button
changes the effect type.
If you have changed the depth
settings, releasing the [EFFECT]
button will not change the effect
type.
NOTE
Depth 0: no effect
Depth 20: maximum effect depth
NOTE
Default depth settings are differ-
ent for each voice.
NOTE
Normal setting = ON
NOTE
Depth 0: no effect
Depth 20: maximum depth
23