Setting The Volume; Using Headphones; Using The Speaker Switch - Yamaha Clavinova CLP-100 Owner's Manual

Setting the Volume

Initially set the [MASTER VOLUME] slider about halfway between the "MIN" and "MAX" settings. Then, when you
start playing, re-adjust the [MASTER VOLUME] slider to the most comfortable listening level.
CAUTION
Do not use the Clavinova at a high volume level for a long period of time; doing so may damage your hearing.
TERMINOLOGY MASTER VOLUME:
The volume level of the entire keyboard sound.
NOTE You can also adjust the [PHONES] output level and the AUX OUT level using the [MASTER VOLUME] slider.

Using Headphones

Connect a pair of headphones to one of the
[PHONES] jacks.
Two [PHONES] jacks are provided.
You can connect two sets of standard stereo head-
phones. (If you are using only one pair of headphones,
you can plug them into either jack.)
Using the Headphone Hanger
A headphone hanger is included in the Clavinova pack-
age so that you can conveniently hang the headphones
on the Clavinova. Install the headphone hanger using
included two screws (4 x 10mm) as shown in the figure.
CAUTION
Do not hang anything other than the headphones on
the hanger. Doing so may damage the Clavinova or the
hanger.

Using the Speaker Switch

This switch turns the internal speakers on or off.
NORMAL (HP. SW) ......... The speakers produce sound as long as a pair of
ON ....................................... The speakers always produce sound.
OFF ...................................... The speakers produce no sound.
The level decreases.
headphones is not connected.
The level increases.
bottom surface
OFF
ON
NORMAL
HP. SW
SPEAKER
standard
PHONES
stereo
phone plug
OFF
ON
NORMAL
HP. SW
SPEAKER
PHONES
CLP-370/340/330, CLP-S308/S306 Owner's Manual
Before Using the Clavinova
15