Supported Input Signals - Sony NU-IP40S Instructions For Use Manual

Supported Input Signals

The unit supports the following signal formats.
Signal formats
1)
HD-SDI
1920×1080/59.94i 4:2:2YCbCr 10-bit
1920×1080/50i 4:2:2YCbCr 10-bit
1)
3G-SDI
1920×1080/59.94p 4:2:2YCbCr 10-bit
1920×1080/50p 4:2:2YCbCr 10-bit
1920×1080/59.94i 4:2:2YCbCr 10-bit
1920×1080/50i 4:2:2YCbCr 10-bit
Quad Link 3G-SDI
3840×2160/59.94p 4:2:2YCbCr 10-bit
3840×2160/50p 4:2:2YCbCr 10-bit
4096×2160/59.94p 4:2:2YCbCr 10-bit
4096×2160/50p 4:2:2YCbCr 10-bit
1) Multiple lines of transmission is not supported.
2) During Level B-DL input, signals will be converted to Level A for output.
3) During Level B-DS input, signals will be output unchanged as Level B-DS. SDI embedded audio is not supported.
4) "2-SI" represents "2-sample interleave division, " and "SQ" represents "square division. " SQ will be converted to 2-SI on the sender side.
3D formats
Side-by-side
Line-by-line
Top-and-bottom
Dual stream
2)
Level A/Level B-DL
2)
Level A/Level B-DL
3)
Level B-DS
3)
Level B-DS
2)
Level A/Level B-DL
2)
Level A/Level B-DL
2)
Level A/Level B-DL
2)
Level A/Level B-DL
28
3D-Dual Stream
3D-Dual Stream
4)
2-SI/SQ
4)
2-SI/SQ
4)
2-SI/SQ
4)
2-SI/SQ