Connecting Cables In Cou - ABB ACS5000 User Manual

6.8.2.2

Connecting cables in COU

Shielded cables
• If you use twisted pair cables, leave the unshielded cable ends
twisted until they reach the terminals.
• Leave unshielded conductor ends as short as possible.
• Use a shield grounding clamp (Fig. 6-22) to fasten the overall shield
and the individual shields to the ground busbar (Fig. 6-22: 8).
1
2
3
(1) Arc Guard™
(2) Remote condition monitoring
NETA-21 and fieldbus interface
(3) Customer terminals
(4) S800 I/O process system
(customer- specific configuration)
3BHS799208 E01 REV E
Figure 6-22 Shield grounding clamp
Figure 6-23 COU customer interface section
ACS5000 WATER-COOLED USER MANUAL
06 ELECTRICAL INSTALLATION
4 5
(5) Grey encoder (optional)
(6) NTAC-02 pulse encoder (optional)
(7) Customer terminals
6
7
117/186