Connecting Auxiliary Power Cables And Space Heater Cables In Wcu - ABB ACS5000 User Manual

6.8.2.1

Connecting auxiliary power cables and space heater cables in WCU

Top cable entry
1. Route the cables through the cable transit into the terminal
compartment (Fig. 6-21: 1) of the WCU.
2. Connect the cables to the relevant terminals.
Bottom entry
1. Route the cables through the floor or the top of the WCU, up the cable
duct (4 in Fig. 6-21) on the right side wall and then into the terminal
compartment (3 in Fig. 6-21) of the WCU.
2. Connect the cable to the bottom of the relevant terminals, according
to the converter wiring diagram.
A
Figure 6-21 Cable routing in WCU800 (A) and WCU1400 (B) cabinets
(1) Terminal compartment
(2) WCU800 cable entry bottom
3BHS799208 E01 REV E
1
2
4
(3) WCU1400 cable entry bottom
(4) Cable entry top (WCU800 and
ACS5000 WATER-COOLED USER MANUAL
06 ELECTRICAL INSTALLATION
B
WCU1400)
1
3
116/186