Hitachi CR22N Instruction Manual page 71

The functions of each icon on the ADMIN screen are described in the table below.
Function
User Management
User Lockout
Language
Rotor Management
Actual Run Timer
Date and time display
Centrifuge ID
Service contact
USB/LAN(option)
communication
Rotor data addition
Press the desired icon. Then the corresponding item is displayed. After setting, press the tab of the
desired screen.
Icon
The user name can be registered and deleted
(see Section 2-6-4 (1)).
User login can be required to start operation
(see Section 2-6-4 (2)).
English and Japanese can be toggled in display
(see Section 2-6-4 (3)).
You can use and control the rotor data such as total
operation hours and number of runs (see Section 2-6-4 (4)).
Actual run timer can be selected
(see Section 2-6-4 (5)).
The date and the time can be set
(see Section 2-6-4 (6)).
Centrifuge ID can be set for identification
(see Section 2-6-4 (7)).
The operation history data of the centrifuge can be exported
to a USB flash drive. (CR22N only)
If your centrifuge has a LAN communication option,
LAN communication start/stoppage can be specified.
(see Section 2-6-4 (8)).
New rotor can be registered (see Section 2-6-4 (9)).
2-56
2-6-4 Administrator (Admin) Functions
Description