Hitachi CR22N Instruction Manual page 67

(1) Zoom
The display on the Run screen can be zoomed
in.
1. Normal:Displays the ordinary Run screen
2.Zoom:The speed and time display is zoomed
when 20 seconds have passed after
reaching the set speed.
Press either the NORMAL or ZOOM button and make
sure that the selected button is surrounded with a green frame.
Then press the x button or the CUSTOM tab to store the setting.
To return from the zoom screen to the normal screen during operation, press anywhere except the
STOP button. Then the screen returns to the normal screen.
(2) Stop signal
The rotor stop signal can be selected from six
kinds of sound including five tunes and electric
beep.
Press the row of the desired stop signal. Then the
stop signal sounds and the row of the selected stop
signal turns blue.
Press the
Enter
To set another function in the CUSTOM screen,
press the x button or the CUSTOM tab.
(3) Volume Adjustment
The sound volume can be adjusted.
The sound volume is turned up as the green range
in the volume setting indicator increases. The
sound volume is the minimum (zero) if there is only
the black range. Adjust the sound volume by
pressing the following buttons.
< The volume is lowered by pressing this button.
> The volume is turned up by pressing this button.
The sound volume is the minimum (zero)
by pressing this button.
The sound volume is the maximum by pressing this button.
Press the x button or the CUSTOM tab to store the setting.
button to store the setting.
Fig. 2-6-3 (1) Zoom Setting screen
Fig. 2-6-3 (2) Stop signal Setting screen
Fig. 2-6-3 (3) Volume Setting screen
2-52
2-6-3 Customizing the Settings