Displaying And Setting G . Sec - Hitachi CR22N Instruction Manual

2-3-4 Displaying and Setting g . sec

2-3-４ Displaying and Setting g . sec
This section describes how to display and set a g . sec.
（1） How to display and set a g . sec value
Step Touch panel operation
1 Check that the desired rotor
is displayed in the ROTOR
indicator of the Run screen.
When the desired rotor is not
displayed, press the ROTOR
indicator to show the ROTOR
CATALOG screen.
(For selecting the rotor, refer
to section 2-4.)
2 In the FUNCTION area of the
Run screen, press the
button.
Press the box (for displaying
3
a g . sec).
Screen displays and notes
Specified setting of
a g . sec
When there is no rotor name on the ROTOR indicator,
○
even if you press the g . sec button, the above box does not
appear.
The box for displaying a g . sec displays the current status
○
in the upper part and the specified setting in the lower
part.
"--Exp--" is displayed when no g . sec value is set.
○
Specified setting of a g . sec is displayed in the above
○
screen.
"--Exp--" is displayed when no g . sec value is set.
2-37
ROTOR indicator
●
Box for displaying
Current status of
a g . sec
a g . sec
Screen for
●
setting a g . sec
appears.
Specified setting of a
g . sec
(Left part) Exponent
(Right part) Mantissa
g . sec button
The box (for
displaying a
g . sec) appears
in the
FUNCTION area.