Customizing The Settings - Hitachi CR22N Instruction Manual

2-6-3 Customizing the Settings

2-6-3 Customizing the Settings
You can customize the settings in the Run screen and the settings in the CUSTOM
screen such as the stop signal, sound volume and backlight.
In the MENU screen, press the
functions is displayed as shown in Fig. 2-6-3.
The functions of each icon in the CUSTOM screen are described in the table below.
Function
Zoom
Stop signal
Volume
Brightness
Pre-cool
Auto standby
Press the desired icon. Then the corresponding item is displayed. After setting, press the
tab of the desired screen.
Customize icon. Then the CUSTOM screen showing the six
Tab of each screen
Fig. 2-6-3 CUSTOM Screen
Icon
The display in the Run screen can be zoomed in (see
Section 2-6-3 (1)).
The rotor stop signal can be selected from six kinds of
sound including five tunes and electric beep (see Section
2-6-3 (2) ).
The volume of the stop signal can be adjusted (see
Section 2-6-3 (3)).
The brightness of the screen can be adjusted (see
Section 2-6-3 (4)).
Pre-cool can be selected (see Section 2-6-3 (5)).
Auto standby mode can be selected (see Section 2-6-3
(6)).
2-51
Description