GE Panda iRes Warmer Operation And Maintenance Manual page 45

Panda iRes Warmer M1110737 006
Illustration
© 2007 General Electric Company, all rights reserved
Description
Step
7 Place the baby in the bed
WARNING:
Do not place baby in bed during
Warmup Mode.
8 For Baby Mode operation, connect the skin
temperature probe to the temperature
probe jack. In the Manual Mode, use a
probe if you wish to display the patient
skin temperature. See "Attaching the Skin
Temperature Probe" later in this section.
9 If Baby Mode is desired, press the "Mode"
key to toggle to Baby Mode.
setting, "Manual" or "Baby" mode, is
highlighted in blue on the left side of screen.
Current mode
3-5