Temperature Regulation - GE Panda iRes Warmer Operation And Maintenance Manual

Temperature Regulation

WARNING:
Do not place the baby in the bed while in Warmup Mode. Warmup Mode is used to quickly
warm and maintain heat to an empty bed. Warmup Mode is not designed for clinical use
with a baby since the Check Baby Alarm is disabled.
Warmup Mode
1-6 Panda iRes Warmer
Screen
M1110737 006
Description
Step
1 The Panda Warmer automatically starts
in Warmup Mode. During Warmup Mode
"Check Baby" alarms are deactivated.
If you do not press the "Admit Baby" key
or the "APGAR On/Off" key during the first
minutes after start up, the display will show
"Warming..." and the radiant heater will
automatically run at 100% power.
2 After 7 minutes, the display indicates "War-
mup Complete..." and the default
heater power setting decreases to 50%.
The display continues to flash "Admit Baby"
until you press the "Admit Baby" key or
the "APGAR On/Off" key and start normal
operation.
© 2007 General Electric Company, all rights reserved