Temperature Unit; Weight Unit; Logo; Change Code - Miele PWM 908 Operating And Installation Instructions

Temperature unit

You can select the unit for the
temperature display.
Factory setting: °C/Celsius

Weight unit

You can choose whether load
quantities are displayed in "kg" or
"lbs". You can also switch this
information off altogether.
Factory setting: kg

Logo

You can choose whether the "Miele
Professional" logo or your own logo
appears in the display.
The option Laundrette ext. (12 prog.)
be selected for the setting

Change code

You can change the Supervisor level
access code to protect the washing
machine from unauthorised access.
 Enter the current code.
 Then enter your new code.

Programme selection

Controls

Useful tip: Start by configuring all
necessary settings and changes to the
washing machine before adjusting any
of the options below.
If "Laundrette basic" or "Laundrette
extended" is selected, the Supervisor
level can no longer be opened from the
display after the Supervisor level is
closed. Please follow the instructions
must
below if you wish to change any other
Controls .
settings.
Opening the Supervisor level (laundrette
mode)
 Switch on the washing machine and
 Touch the Start/Stop sensor and
 Close the washing machine door.
 Wait until the Start/Stop sensor,
 Release the Start/Stop sensor when
Supervisor level
You can select whether the machine is
operated as a laundrette machine.
Shortcuts are the easiest way to
operate the machine. Operators
cannot change the preset
programmes.
open the door.
hold it down during steps -.
which is now flashing rapidly, lights
up constantly.
the Start/Stop sensor lights up
constantly.
87