Using for the first time
Removing the transit bars
The display will remind you to remove
the transit bars.
Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in "Installation and connection".
Confirm that the transit bars have
been removed with the
The following appears in the display:
Continue setting up as described in the
Operating instructions
Confirm the message with the
sensor.
Completing the commissioning
process
To complete commissioning, the
Cottons 60°C programme must be run
without laundry and without detergent.
If the power is interrupted prior to the
start of the first wash programme (e.g.
if the machine is switched off with the
button), the initial commissioning
process can be completed again.
Once a wash programme has been
running for over 20 minutes, the initial
commissioning process does not have
to be performed again.
Turn on the water taps.
Touch the
Programmes
24
sensor.
OK
OK
sensor.
Programmes
White items
Minimum iron
Coloured
items
Touch the
Coloured items
Overview
Temperature
60 °C
Coloured
Extras
items
not selected
0:59
h
Timer
Touch the Start/Stop sensor.
When the programme has finished, your
machine is ready for use for the first
time.
If you have activated disinfection
programmes, you must complete the
Thermal disinfection programme as
the first programme; make sure you
use a suitable detergent but do not
load the machine.
Express
Delicates
Woollens
sensor.
Spin speed
1600
rpm
CapDosing
not selected
11:02
11:02