Time
After selecting the clock format, you
can set the time of day.
Clock format
– 24 h clock
– 12 h clock
– No clock
Set
– The time can be set.
Date
The date can be set after selecting the
date format.
Date format
– DD.MM.YYYY
– YYYY.MM.DD
– MM.DD.YYYY
Date
– The date can be set.
Supervisor level
Volume
The volume for various signal tones
can be changed.
– Finish tone
– Keypad tone
– Welcome tone
The tones can be set to one of 7
different levels or switched off
altogether.
– Fault alarm
The fault alarm can be activated or
deactivated.
Visibility parameters
Various parameters, such as the
temperature, spin speed, Extras, etc.,
are displayed when a programme is
selected. You can decide which
parameters should not be displayed.
These parameters can then not be
edited during programme selection.
Factory setting: all parameters are
visible (marked in orange)
Sorting Extras
In the setting
Visibility parameters
Extras
appears in the bottom line.
Touch the sensor control to change
the sequence of Extras (see
"Supervisor level - Arranging
programmes").
,
Sort
85