Reference to external
appliances
A reference to external hardware
appears.
Confirm with the
Before the initial commissioning,
connect the XCI box or slide a
communication module into the slot
on the back of the washing machine.
The washing machine must be
disconnected from the mains for this
purpose. Then start the
commissioning process.
Setting the brightness of the
display
You will be asked to set the brightness
of the display.
Display brightness
Darker
Touch the segment bars until you
reach the required level of brightness.
The selected brightness level will be
highlighted orange.
Confirm with OK.
The display will change to the next
setting.
OK
sensor.
Brighter
Using for the first time
Setting the date
Date
21
22
23
24
25
Place your finger on the number to be
changed and move your finger in the
desired direction.
When all values have been set,
confirm with the OK sensor.
The display will change to the next
setting.
Confirming the time query
The following query will appear in the
display:
Should the clock display not be shown?
Touch the
If you select
the
Time
setting.
If you select
OK
to the
setting.
Time
May
June
July
August
September
yes
or
no
sensor.
yes
, the system will skip
, the display will switch
no
2021
2020
2019
2018
2017
OK
21