Hitachi Hidic EH-150 Applications Manual page 6

Preliminary Rev.03
Chapter 1
We appreciate that you have selected the HITACHI Programmable Controller (This after called PLC) EH-
150 Series.
This application manual describes how to properly operate the EH-150 Ethernet Module.
Please read this manual carefully to familiarize yourself with the procedures respectively of installation ,
operation, and maintenance and check.
We have several documentation to refer in below.
Items
Main system of EH-150
Programming Software
Ethernet module
*The last character of the manual number may be modified when the product is revised.
Notes. The contents of this manual may be modified without previous notice.
1.1 Before to use
This module is manufactured carefully. When you receive this Ethernet Module, kindly to check the following
matters:
(1) If the model name is correct.
(2) If there is no shipping damage on product
(3) If following materials are in a carton box.
No. Products Name
1 Ethernet module
Data Sheet
2
(Instruction Manual)
If you have find something inconvenience, please contact your distributor.
- Please use EH-CPU448. In case of CPU is CPU104/208/308/306, this module can't operate well.
The contents of this manual might be changed without notice.
Introduction
Table 1.1 The list of documentation
Name of documentation
EH-150 Application manual
LADDER EDITOR (for MS-DOS)
LADDER EDITOR for Windows® (Windows®95/NT)
Ethernet module (EH-ETH) Application manual
Table 1.2 List of Ethernet Module materials
Model number
EH-ETH
NJI-321: Japanese
NJI-321(X): English
Outlook pcs
1A 1B 1M PW
2A 2B 2M ER
0 1 2 3
RESET
1
CN1
EH‑CU
1
Cautions
1-1
Chapter 1 Introduction
Number of Manual
NJI-281B(X)
NJI-342A(X)
NJI-343(X)
NJI-361(X)
Remarks
(CAUTION)
To use the specified CPU
module, when you use this
Ethernet module in your
system. Please refer the
description for this in Chapter
3 and (1).
This documentation has the
description of installation