Caller Id For Analog Extensions (Clip) - Siemens HiPath 1100 Series Programming Manual

Programming an Extension
Step by Step
*
56
or Activate/Deactivate permission for Silent Monitoring of
#
a specific extension:
* = To activate
= To deactivate (default)
#
Enter the next extension number
or
Press this key.
#
Initial state for Programming Mode.

Caller ID for Analog Extensions (CLIP)

When the system receives an incoming call with caller
ID (enabled by the local carrier), the extension config-
ured to use this feature receives and displays the
caller's data on the telephone display.
For example,
• E805C (Brazil)
• Profiset 3020
• Profiset 3025
• Gigaset 4010
The telephone must have an external power supply and
comply with the appropriate regulations.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 1 0
Enter the analog extension number (e.g., 12/102).
... Select the type of configuration:
0 4
Within the system, Silent Monitoring has the
same restrictions as the Conference and
Override features.
A maximum of 2 simultaneous conferences is
allowed by the system. Note: The Override
feature is ticketed as a Conference.
If the monitoring or the monitored party changes
status, Silent Monitoring is canceled. This
occurs, for example, when a call is placed on
hold.