Dids For Entrance Telephones - Siemens HiPath 1100 Series Programming Manual

Entrance Telephone
Step by Step
1
1
100
or
Press this key.
#
Initial state for Programming Mode.

DIDs for Entrance Telephones

You can specify which telephones are to answer the
Entrance Telephone calls (up to 10 extensions).
The default setting is extension 11/101.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
5 9
... Enter the slot for the extension configured as the Door
4
Opener (1 to 4).
Enter the extension number (e.g., 12/102) to answer
calls from the Entrance Telephone.
* Confirm the extension assigned to the Entrance
Telephone slot.
Enter the next extension number
or
Press this key.
#
Initial state for Programming Mode.
Deleting DID Extensions
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
5 9
... Enter the slot for the extension configured as the Door
4
Opener (1 to 4).
* Delete DID extensions.
Press this key.
#
Initial state for Programming Mode.