Electromagnetic Compatibility - Siemens SIMATIC S7-1500 System Manual

Korea Certification
KC registration number:
Please note that this device corresponds to limit value class A in terms of the emission of
radio frequency interference. This device can be used in all areas, except residential areas.
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
Marking for the Eurasian Customs Union
EAC (Eurasian Conformity)
Customs Union of Russia, Belarus and Kazakhstan
Declaration of conformity with the technical requirements of the Customs Union (TR CU).
Further information
The certificates for the markings and approvals can be found on the Internet under
Service&Support (https://support.industry.siemens.com/cs/ww/en/ps/25715/cert).
15.3

Electromagnetic compatibility

EMC
Electromagnetic compatibility (EMC) is the ability of an electrical installation to function
satisfactorily in its electromagnetic environment without interfering with that environment.
The SIMATIC Drive Controller meets the electromagnetic compatibility requirements for drive
systems (PDS – Power Drive Systems) as defined in EN 61800-3.
Environments
EN 61800-3 defines different requirements depending on the location of the drive system,
referred to as the First and Second Environment.
First Environment locations are defined as residential buildings or locations in which the
drive system is directly connected to the public low-voltage power supply network without
intermediate transformers.
The Second Environment is understood as all non-residential locations. The main Second
Environment locations are industrial zones supplied by the medium voltage network via their
own transformers.
SIMATIC Drive Controller
System Manual, 11/2019, A5E46600094-AA
Technical data
15.3 Electromagnetic compatibility
271