2 SPECIFICATIONS OF INDIVIDUAL MODULES
2.3 Mount Bases
2.3.1 Basic mount bases
A basic mount base is used to mount a remote I/O station module, a power supply module, and a
variety of I/O modules in the I/O unit, as shown below.
Figure 2-3 Parts of the Model HSC-2104 Mount Base (Shown as Representative)
and Their Names
Name
2-slot I/O mount base HSC-2102
4-slot I/O mount base HSC-2104
8-slot I/O mount base HSC-2108
1
2
PS
ST
I/O-0
Table 2-5 Available Basic Mount Base Models
Model
A total of five -- one for a power supply module, two
for a station module, and two for I/O modules.
A total of seven -- one for a power supply module, two
for a station module, and four for I/O modules.
A total of eleven -- one for a power supply module, two
for a station module, and eight for I/O modules.
I/O-1
I/O-2
I/O-3
Remarks: Number of slots provided
2-4
3
4