Hitachi HSC-2100 Hardware Manual page 145

5 MAKING USE OF MODULES
⑭ Make the S10mini Ladder Chart System active again and choose [MCS(M)] from the
[Utility(U)] pulldown menu.
⑮ Read the values from the DW registers according to the instructions given below.
⑯ Set those values equal to the contents of the DW registers used in the S10/4α controller,
according to the instructions given below.
Choose [MCS(M)] from [Utility(U)]
pulldown menu.
Select the "Specify Symbol(P)" radio button.
Enter the symbol "DW000" in the edit box,
for example.
Click the [Read(R)] button.
Enter the same value (as that used in the
S10/4α controller) for the DW000 register in
the edit box, for example.
Click the [Write(W)] button.
5-44