Hitachi HSC-2100 Hardware Manual page 135

5 MAKING USE OF MODULES
③ If a necessary connection setting is already made, proceed to Step ⑤.
Otherwise, choose [Change connection of PCs(N)] from the [Utility(U)] pulldown menu.
④ Specify the desired communication port and click the [OK] button.
⑤ Choose [New file(N)] from the [File(F)] pulldown menu.
⑥ The dialog box shown below appears. Click the [OK] button.
Choose [Change connection of PCs(N)] from
[Utility(U)] pulldown menu.
Specify the communication port and click [OK].
("COM1" is specified as the communication
port.)
Choose [New file(N)] from [File(F)] pulldown
menu.
Click [OK].
5-34