Converting The Ladder Program - Hitachi HSC-2100 Hardware Manual

5 MAKING USE OF MODULES

5.5.3 Converting the ladder program

The procedure described below converts into S10mini version the ladder program that has been
obtained by performing the procedure described in Subsection 5.5.2, "Saving the ladder
program," and is currently open.
① Start the S10mini Ladder Chart System.
② Choose [New file(N)] from the [File(F)] pulldown menu.
A new ladder chart sheet will then be open as shown below.
Choose [New file(N)] from [File(F)]
pulldown menu.
5-38