Download Print this page

Huawei ViewPoint 8650C Series User Manual page 80

Advertisement

ViewPoint 8650C
User Guide
Icon
Issue 10 (2013-07-20)
Function
Description
Broadcast
This is used to broadcast the video of a participant to the
Participant
other participants.
Stop
This is used to stop broadcasting the video of a participant
Broadcasting
to the other participants if that participant has completed its
Participant
speech.
Set Continuous
This is used to display a dialog box in which you can
Presence
change the participant displayed in a pane or the layout of
the continuous presence.
Broadcast
This is used to broadcast the continuous presence to all the
Continuous
participants in the conference.
Presence
Cancel
This is used to stop the broadcasting of the continuous
Continuous
presence to all the participants in the conference.
Presence
Roll Call
After you select a participant and perform the Roll Call
operation, the video of the participant is broadcast. In this
case, the microphones of all the participants except the
chair participant and the broadcasting participant are
muted.
Voice Activation
This is used to adjust the sensitivity of voice activation. If
the voice activation function is enabled during a
conference, the MCU automatically switches the
broadcasting participant to the participant with the loudest
voice.
Cancel
This is used to revoke the chair control rights of a selected
Chairperson
participant to change the participant to a non-chair
Token
participant.
View Packet Loss
This is used to view the packet loss ratio of a selected
Ratio of
participant.
Participant
Cancel H.239
This is used to cancel the H.239-Content sending right of a
Content Token
selected participant. In this case, the other participants at
the conference can request the H.239 Content token.
Cancel LSD
This is used to close the low speed data (LSD) channel of a
Token
selected participant. In this case, the participant cannot
control remote cameras.
Audio Loopback
This is used to perform an audio loopback test on a
selected participant.
Video Loopback
This is used to perform a video loopback test on a selected
participant.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Holding a Conference on the Web Interface
72

Advertisement

loading

This manual is also suitable for:

Viewpoint 8650c-12Viewpoint 8650c-24V100r008