Bosch Conettix B465 Installation And Operation Manual page 9

Conettix Universal Dual Path Communicator
Installation workflow checklist
(optional), page 16)
plug-in communicator module (optional), page 17)
communicator Installation Guide for more information on signal strength.
Bosch Security Systems, Inc.
Plan the installation.
Unpack the device contents
Install the enclosure (Refer to Mount the enclosure, page 15)
Mount the B465 into the enclosure (Refer to Install the B465 in the enclosure, page 17)
Mount the B46 (module and cover) into the enclosure (Refer Insert B46 LED cover
Insert the plug-in communicator into the B465 (if required) (Refer to Install the cellular
Wire the B465 to a compatible control panel (Refer to Wiring installation, page 19)
Wire the relays (outputs)
Power up the system
Install a communication program (if required) (Refer to Communications)
Configure the communication module
Verify LED activity (Refer to B465 LED status indicators, page 80)
Review signal strength on the cellular communicator (if required). Refer to your cellular
Installation is complete
Installation and Operation Manual
Introduction | en 9
2017.11 | 05 | F.01U.311.207