System Overview; B465 Overview - Bosch Conettix B465 Installation And Operation Manual

10 en | System overview
3

System overview

Refer to the figure below for the complete B465 system configuration.
Figure 3.1: System connection overview
Callout ー Description
1 ー Intrusion/fire control panel
2 ー Phone line connections (phone line 1
and phone line 2)
3 ー B465 Conettix Universal Dual Path
Communicator
4 ー B44x plug-in cellular communicator
5 ー Ethernet connection (RJ-45 cable
connection to the LAN/WAN)
6 ー Internet/Cloud
3.1

B465 overview

The B465 allows any fire and intrusion control systems with PSTN dialers and/or dry contact
inputs to communicate with Bosch central station receivers over Ethernet or cellular networks
through IP. This allows customers using control panels developed before the introduction of
networking and cellular to eliminate costly phone lines and gain some of the modern
performance that IP networking enables.
The B465 is compatible with the following standard reporting formats:
–
–
–
–
–
–
–
2017.11 | 05 | F.01U.311.207
1
3
18 VAC
BATTERY
18VAC + BAT -
2
Modem II
Modem IIe
Modem IIIa 2
Ademco Contact ID (SIA DC-05) +10 digit account codes
Pulse 3/1, 3/1 Checksum (2300 Hz ACK Tone)
Pulse 3/1, 3/1 Checksum (1400 Hz ACK Tone)
Pulse 4/2 (2300 Hz ACK Tone)
Installation and Operation Manual
4
MODULE 1
Y X
MODULE
RELEASE
COMMUNICATION MODULE 1
ETHERNET
5
100BASE-T
LINK
USB
SYSTEM TROUBLE
TX TX
RX
SDI2
AC
Device Bus AC
R Y G B BATTERY
INPUTS
2.2 k End of
Line Resistors
PANEL
PANEL
1 COM 2 3 COM 4
LINE 1 LINE 2
NO C NC C NO C NO 12V 1 COM 2 3 COM 4 PNL LINE 1 PNL LINE 2
RELAY 1 RELAY 2 RELAY 3 AUX COM
Callout ー Description
7 ー Cellular communication to cellular carrier
8 ー Cellular carrier network
9 ー Conettix receiver/gateway (D6100IPv6
shown)
10 ーConettix receiver/gateway (D6600
shown)
11 ー Monitoring center automation
(classified per UL 1981)
Conettix Universal Dual Path Communicator
8
7
6
Bosch Security Systems, Inc.
9
10
11