Removing The Front Upper Cowling; Installing The Front Upper Cowling - Yamaha YZF-R1 Series Service Manual

EAS31362

REMOVING THE FRONT UPPER COWLING

1. Remove:
• Front upper cowling "1"
1
a. Remove the holder "2" from the front turn
signal/position light lead (left) and auxiliary
light lead. Disconnect the front turn signal/
position light coupler (left) "3".
2
3
b. Disconnect the front turn signal/position
light coupler (right) "4". Remove the front
turn signal/position light lead from the
holder "5".
c. Remove the rearview mirror nuts, and
then remove the rearview mirrors "6".
6
d. Remove the front upper cowling bolts "7".
7
e. Remove the front upper cowling "1".
f. Unhook the projections "a" on the front up-
per cowling from the holes "b" on the front
cowling assembly. Unhook the projection
"c" on the front upper cowling from the
grommets "d" in the front cowling assem-
bly. Unhook the projections "e" on the front
upper cowling from the holes "f" on the
front cowling assembly. Slide the front up-
per cowling upward and then, unhook the
holes "g" in the front upper cowling from
the projections "h" on the front cowling as-
sembly.
g
c
EAS31363

INSTALLING THE FRONT UPPER COWLING

5
1. Install:
• Front upper cowling "1"
4
1
a. Install the front upper cowling "1".
b. Fit the holes "a" in the front upper cowling
into the projections "b" on the front cowling
assembly and then, slide the front upper
cowling downward. Fit the projection "c"
4-14
GENERAL CHASSIS (4)
h
g
d
c
e f
b
a
a
7
h
d
b