GE AV-300i User Manual page 148

PI control src
PID PI enab src
PID I freeze src
PIGP ref src
PID Mlt PI sel 0
PID Mlt PI sel 1
PID Mlt PI 3 src
PI control cfg
PI steady delay
PI steady thr
PI P1 gain %
PI I1 gain %
PI P2 gain %
PI I2 gain %
PI P3 gain %
PI I3 gain %
PIGP tran21 h thr
PIGP tran32 l thr
PIGP tran21 band
PIGP tran32 band
PI Pinit gain
PI Iinit gain
PI clamp top
PI clamp bot
Int PID Mlt PI 1
Int PID Mlt PI 2
Int PID Mlt PI 3
PI control mon
PID PI lock mon
PIGP ref mon
PI Pnorm gain
PI Inorm gain
PID PI out mon
PID Mlt PI 0 mon
PID Mlt PI 3 mon
PID MltPI selmon
Ch.1
148
GEH-6641E
Source of the PI section enable signal
Source of the PI section Freezing signal
Source of the gain adaptive signal
Source of the selector 0 signal of the starting multiplier
Source of the selector 1 signal of the starting multiplier
Source of the multiplier 3 signal (ex. diameter sensor)
Period of time, during which the P and I init gain gains are kept active after the
PI steady thr threshold has been overcome by the PID FF mon reference.
Steady State detecting threshold
PI gain segment 1
............
PI gain segment 2
............
PI gain segment 3
............
Segment transition point from 1 to 2
Segment transition point from 2 to 3
Width of the transition band from 1 to 2
Width of the transition band from 2 to 3
P starting gain PI section
I starting gain PI section
PI upper conversion value
PI lower conversion value
Initialization value of the Multiplier 1
Initialization value of the Multiplier 2
Initialization value of the Multiplier 3
Monitor lock PI section
Reference monitor of the gain adaptive
Monitor of the PI Block output
Monitor of the multiplier 0 value
Monitor of the multiplier 3 value
Monitor of the selected multiplier
—————— Function Description ——————