Table of Contents
Advertisement
3-5 Fibre Channel Storage Unit Setup — Configuring Logical Drives
To change a missing disk to a Dynamic/Online
disk
Use the following procedure.
1
Follow the tree on the left of the window to select
[Storage] > [Disk Management].
2
When the Write Signature and Upgrade Disk
Wizard window appears, click Cancel to close the
window.
3-18
Chapter 3 Preparations
3
Right-click on disk 2, and select Sign.
This example shows disk 2, but this may vary
depending on the system.
The Write Signature window appears.
4
Select all the disks to be used, and click OK.
5
Right-click on the desired disk, and select Upgrade
to Dynamic Disk.
Advertisement
Table of Contents
Troubleshooting
