Control Panels - Sony DMW-S05NL-C Installation Manual

DMW-RT01 SDTV Realtime Processing
1)
Board
Installing this board in the XPRI System enables a
variety of video effects such as 3D transformation,
page turn and ripple to be applied to SDTV video
signals.
For details, refer to the DMW-RT01 Installation Manual.
Restrictions on installation of option
boards
The option boards that can be installed in the system
are as follows.
• DMW-IF01 SDTI Interface Board
• DMW-IF02 HDTV Interface Board
• DMW-RT02 Realtime Video Processing Board (only
when HDTV Interface Board is installed)
• DMW-RT01 SDTV Realtime Processing Board (only
when HDTV Interface Board is not installed)
Other peripheral options are as follows.
• DMW-C1/C2/C3/C4 Control Panel
• DMW-EX01 TC/GPI Interface Unit
• DMW-EX02 9-pin Remote Interface Unit

1-2-2 Control Panels

Four Control Panels are provided to facilitate XPRI
editing system operations, as described below. You
can select the panels you need and position them as
required.
DMW-C1 Media Bar Control Panel
This panel has eight knobs and two buttons. You can
use them to adjust parameters for material color
correction, equalizing, compositing, and so on.
This unit is used by connecting it to the Jog & Shuttle
Control Panel or the Audio Control Panel.
.........................................................................................................................................................................................
1) Option
DMW-C2 Jog & Shuttle Control Panel
This panel is used to control VTRs and make editing
operations. It has function buttons and a search dial.
This panel is connected to the Digital Media
Workstation or to the Audio Control Panel using the
supplied USB cable. It is powered by the supplied AC
adaptor.
Accessories
USB cable (1)
Palm rest (1)
AC adaptor (1)
DMW-C3 Audio Control Panel
This panel provides audio faders. It has eight faders for
audio tracks and one master fader. It also has a muting
button, function buttons, a headphones audio level
control knob, and monitor setting buttons.
This panel is connected to the Digital Media
Workstation or to the Jog & Shuttle Control Panel by
using the supplied USB cable. When monitoring audio
with headphones, the cable with RCA phono plugs
(not supplied) is used to connect this panel to the AV I/
O Block. The Audio Control Panel is powered by the
supplied AC adaptor.
Accessories
USB cable (1)
AC adaptor (1)
DMW-C4 Trackball Control Panel
This panel is used in keyframe operations for 3D
effects. It has a trackball and Z ring, and six function
1)
buttons.
This panel is used by connecting it to the Jog & Shuttle
Control Panel or the Audio Control Panel.
Accessories
Palm rest (1)
1)
1)
1)
1-3
Chapter 1 Overview