Connecting A Pc To The Motor-Side Rmio Board - ABB ACS800 Series Hardware Manual

82
In the example below, one AIMA-01 I/O module adapter is connected to the RMIO
boards of the line-side and motor-side converters.
RDCO
For more information, see AIMA-01 I/O Module Adapter User's Manual
(3AFE68295351 [English]).

Connecting a PC to the motor-side RMIO board

Connect the PC to channel CH3 of the RDCO module in the motor-side converter
using a fibre optic cable and a suitable adapter.
Make sure that you connect the PC to the correct RMIO board. For the locations of
the RMIO boards on the drive, see section
For more information on the RDCO module, see RDCO-01/02/03 DDCS
Communication Option Modules (3AFE64492209 [English]).
Electrical installation
RMIO board of
the line-side
converter *)
CH0
*) WARNING! In frame size R6, you must remove the top cover to reach the RMIO board.
Read and follow the
instructions can cause injury or death.
RMIO board of
the motor-side
converter
RDCO
CH1
Safety instructions on the first pages of this manual. Ignoring the safety
Product overview
AIMA-01 I/O
module adapter
on page 27.