Fan Replacement (R5, R6); Additional Fan; Replacement (R5) - ABB ACS800 Series Hardware Manual

Fan replacement (R5, R6)

1. Loosen the fastening screws of the top plate.
2. Push the top plate backwards.
3. Lift the top plate up.
4. Disconnect the fan supply wires (detachable connector).
5. Lift the fan up.
6. Install the new fan in reverse order.
1

Additional fan

Replacement (R5)

Remove the front cover. The fan is located on the right-hand side of the control panel
(R5). Lift the fan out and disconnect the cable. Install the new fan in reverse order.
1
3
5
4
111
Maintenance