Sony DVCAM DSR-PDX10 Service Manual page 377

Setting time values
Switching the time value
TC/U-BIT
Press TC/U-BIT. Each time you press TC/U-BIT, the time value changes between the
time code and user bits.
TC: Displays the time code. This is indicated as "00:00:00:00".
U-BIT: Displays user bits. This is indicated as "00 00 00 00".
Time code/user bits
Note
The time code and user bits cannot be displayed properly if the tape does not have time
code and/or user bits recordings or if the time code was recorded using a non-
compatible method.
125