Sony DVCAM DSR-PDX10 Service Manual page 261

Recording a picture
1
Remove the lens cap.
3
Press OPEN to open
the LCD panel.
The picture appears
on the screen.
When you purchase your camcorder, the clock setting is set to off. If you want to record
the date and time for a picture, set the clock setting before recording (p. 20).
Monitoring the playback picture on the LCD
screen
(p. 41)
1
Set the POWER switch
to VCR while pressing
the small green button.
NOTE
Do not pick up your
camcorder by holding the
viewfinder, the LCD panel,
the battery pack or the
microphone.
(p. 25)
2
4
Press START/STOP.
Your camcorder
starts recording. To
stop recording, press
START/STOP again.
Viewfinder
When the LCD panel is closed, use the viewfinder with your eye
against the eyecup.
Adjust the viewfinder lens to your eyesight (p. 29).
POWER
Set the POWER
switch to CAMERA
while pressing the
small green button.
2
Press m to rewind the tape.
REW
3
Press N to start playback.
PLAY
POWER
POWER
9