Date/Time Setting - Toshiba SL-5300 Series Owner's Manual

15. SET UP MODE
Set Up Mode Menu
Item
Initial set
Date/Time
Label format
Barcode
Memory card
PLU Data
maintenance
Password
assignment
Wireless LAN
15.1

Date/Time Setting

You can set the date/time, machine number, and store code with this menu.
The following screen will appear when the [Date/Time] key of the Set up menu is touched.
24 hours/12 hours key
This item is intended for the service personnel. DO NOT change
the initial settings.
Date, time, machine number, and store code are programmable. Section 15.1
Various print formats are programmable.
Bar code formats are programmable.
Data can be read from/written on a memory card.
Each of the already programmed PLU data can be changed at
the same time.
Password to enter each operating mode is programmable.
Various parameters, transmission rate, etc. are programmable,
the status, such as, radio level/noise level are displayed, and a
communication test is performed.
Function
15- 2
EO1-31009
15.1 Date/Time Setting
Refer to
-----
Section 15.2
Section 15.3
Section 15.4
Section 15.5
Section 15.6
Section 15.7
AM/PM key
Time Area
Machine No. area
Store Code area