Footnote Setting - Toshiba SL-5300 Series Owner's Manual

14. PROGRAMMING MODE
Procedure
Item
Changing the title of
nutrition
Changing the unit of
measure
Changing the necessary
daily value
Adding a new nutrition
NOTE: The title and the unit of measure for Vitamin A, Vitamin C, Calcium, Iron, and Protein cannot be
changed.

14.5.7 Footnote Setting

With the initial settings, the footnote setting is not available. To use this function, contact your nearest
TOSHIBA TEC service representative or sales agent.
The following screen will appear when the [Footnote] key of the Nutrition Facts Programming screen
is touched.
Numeric 1 area
Procedure
Item
Entering Footnote 1
Entering Footnote 2
1. Touch the nutrition area to be changed.
2. The edit screen will appear.
3. Input a new title. (Max. 20 characters)
1. Touch the unit of measure area to be changed.
2. The edit screen will appear.
3. Input a new unit. (Max. 2 characters)
1. Input the numeric data. (0 – 9999 or 0.0 – 99.9)
2. Touch the daily value area.
1. Touch a vacant area.
2. Enter a new title on the edit screen.
3. Touch its unit of measure area.
4. Enter a unit on the edit screen.
5. Touch its daily value area.
6. Input a numeric data. (0 – 9999 or 0.0 – 99.9)
1. Input a numeric data. (0 – 99999)
2. Touch the left side data entry area.
NOTE: For Calories, the effective value is 0 – 9999. Refer to the Reference
Values for Nutrition Labeling table.
1. Input a numeric data. (0 – 99999)
2. Touch the right side data entry area.
NOTE: For Calories, the effective value is 0 – 9999. Refer to the Reference
Values for Nutrition Labeling table.
Procedure
Procedure
14- 25
EO1-31009
14.5 Nutrition Facts Setting
Numeric 2 area