16. REGISTRATION MODE
16.1.6 Special Information Assignment
You can select up to 3 lines of special information to be printed on the label.
Special information should have been programmed in the message/information setting menu in the
Programming Mode. (Refer to Section 14.8.) Also, it is necessary to select the label format which
accommodates the net weight statement. (Refer to Section 15.2 Label Format Setting.)
The selected special information is printed in the area of the Net weight statement during a Weigh or
By-count operation.
The following screen will appear when the [SPECIAL INFORMATION] key of the Registration Mode
Programming screen is touched.
Key Functions
Key
BACK
Procedure
Item
Assigning the special
information
Cancelling the assignment
Used to return to the Registration Mode initial screen.
1. Touch the desired information No. area. (SP. INFO. 1 to 3)
2. Touch the desired message. The selected message is shown in pink.
1. Touch the information No. area to be cancelled. (SP. INFO. 1 to 3)
2. Touch the message to be cancelled.
message returns to blue.
Function
Procedure
16- 9
16.1 Programming for the Registration Mode
BACK key
SP. INFO.1 to 3 areas
The color of the cancelled
EO1-31009