11. DAILY MAINTENANCE
11.2 Removing the Jammed Media
1.
Turn off the power switch.
2.
Pull out the label cassette.
CAUTION!
Do not push down or hit the print head block, as this may cause a machine failure.
3.
Remove the jammed media.
4.
Re-load the label roll correctly, and push the label cassette into the scale with the top edge of the
label protruding from the media outlet. (Refer to Section 8. Loading/Replacing the Media.)
Print Head Block
Label Cassette
11- 3
11.2. Removing the Jammed Media
Label Cassette
EO1-31009