Training Mode - Toshiba SL-5300 Series Owner's Manual

13. OUTLINE OF MAIN MENU
The following table describes the contents of the main menu and their functions.
Key Mode
1 REG.NORMAL
(LABEL)
2 SET UP
3 PROGRAM
4 REPORT
5 RESET
6 REG. MARK DOWN In this mode, the prices are reduced from the usual prices.
7 REG. REWRAP
8 TRAINING (LABEL) This mode is a training mode intended for operators to learn
9 SLEEP
10 SLIDE SHOW
The modes protected by the password are displayed with a key symbol. To enter these modes, first
input the password with the numeric keys, then touch the desired menu key.
NOTE: The Set Up mode has been protected by the initial settings. To enter the Set Up mode, the master
password is required. For details, please contact the nearest TOSHIBA TEC service representative
or sales agent.
In this mode, you can perform daily operations, such as,
weighing commodities, calling the registered PLUs, and
issuing the desired number of labels. You can also change
the PLU data, select the print items, and adjust the feed
amount, sensor sensitivity, and print tone.
In this mode, you can set the date/time, print items, label feed
amount, sensor sensitivity, print tone, label format, bar code
types, print titles, password, etc. You can also read/write data
from/to the PC card.
In this mode, you can program the various settings required for
the daily operation, such as, unit price, ingredient, commodity
name, message, store name and address, tare, SFKC, etc.
In this mode, you can check the total memory or issue the X
report of the totals registered in Registration Mode (NORMAL,
MARK DOWN, REWRAP). Also, it is possible to send the
registered data from the satellite scales to the master scale.
In this mode, you can reset the total memory, issue the Z
report of the totals registered in Registration Mode (NORMAL,
MARK DOWN, REWRAP).
The transaction data in this mode will be stored separately
from the Registration NORMAL (LABEL) Mode.
In this mode, rewrapped products are registered. The
transaction data in this mode will be stored separately from the
Registration NORMAL (LABEL) Mode.
how to operate this scale. Any operations performed in this
mode will not change the data in the memory.
This is an energy saving mode that may be used when the
machine is not used for a long time.
In this mode, programmed image data is displayed on the
operation panel.
13- 2
Function
EO1-31009
13. OUTLINE OF MAIN MENU
Refer to
Section
16
Section
15
Section
14
Section
19
Section
17
Section
18
Section
20
Section
21
Section
22