Setup; About The Ip Address; Checking The Ip Address; Setting The Ip Address - Sony UP-DF750 Setup And User's Manual

Setup

About the IP Address

When you use the unit for the first time immediately after
you purchase the unit, it is necessary to make settings for
the DICOM section integrated in the unit, such as
specifying the IP address and so on. Before starting the
setup procedure, confirm the following with the network
administrator.
• The IP address that the unit will use on the network
• Subnet mask of the network
• Gateway address, if a gateway is included in the network

Checking the IP Address

To confirm the IP address, perform the following steps.
1
Turn the UP-DF750 on.
2
Press the MENU button.
The menu screen appears.
3
Use the F and f buttons to move the cursor to
"Information" and press the g button.
The current IP address setting is shown.
60
About the IP Address / Setting the IP Address

Setting the IP Address

To assign an IP address to be used by the unit, perform the
following steps.
Note
If network settings are changed by mistake to unsuitable
values, the unit will no longer be accessible via the
network. Network settings should only be changed by the
system administrator.
1
Press the MENU button.
The menu screen appears.
2
Use the F and f buttons to move the cursor to
"System Settings" and press the g button.
The following screen appears.