Specifications - Sony UP-DF750 Setup And User's Manual

After you have finished all cleaning tasks
Turn the unit on by pressing the 1ON/STANDBY switch
on the front panel.
The "Film Station" logo is shown on the LCD panel. Then
the following screen appears.
When the following message is appears on the LCD after
several minutes, you can start printing again.

Specifications

Power requirements
AC 100-120/200-240 V, 50/60 Hz
Input current 4.4/2.4 A
Operating temperature
10 °C to 30 °C (50 °F to 86 °F)
Operating humidity
20% to 80% (no condensation allowed)
Operating pressure
700 hPa to 1,060 hPa
Storage and transport temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and transport humidity
20% to 80% (no condensation allowed)
Storage and transport pressure
700 hPa to 1,060 hPa
Dimensions Approx. 600 × 316 × 686 mm (w/h/d)
(23 5/8 × 12 1/2 × 27 1/8 inches) (Without
including projecting parts)
Mass Approx. 65 kg (143 lb 4 oz)
Printing system Thermal printing
Resolution 23.78 dot/mm (604 dpi)
Gradations 16,384 levels processing
Maximum print size
346.7 × 415.3 mm (when using the
UPT-517BL)
Picture elements
8,256 × 9,888 dots (w/h) (when using the
UPT-517BL)
Throughput Approx. 75 sheets/hour (excluding the
time for cooling the head) (when using
the UPT-517BL)
Digital interface
Network port × 1
(RJ-45 Modular jack), Conforming to
1000BASE-T/100BASE-TX standard
Input connector AC IN (for power)
Accessories supplied
Output tray (1)
Cleaning Kit (1)
Output tray stopper (1)
Film tray size adapter kit (1)
Before Using this Imager (1)
CD-ROM (Instructions for Use disk) (1)
Service Contact List (1)
Accessories supplied separately
Blue Thermal Film UPT-517BL
Blue Thermal Film UPT-514BL
Blue Thermal Film UPT-512BL
Blue Thermal Film UPT-510BL
Blue Thermal Film UPT-M712BL
Blue Thermal Film UPT-M710BL
Cleaning kit UPA-500
43
Specifications